J. Kissel, H. Radkins Hugh and I hammered essentially everything big bolted to the HAM5 table this afternoon, including: OFI Cage (with new baffling?) OFI Side Baffle (drawing??) SRM Cage (with new Venetian Baffles D1700257) SRM Table Baffle (D1700270) All 3 HAM ISI Front Guard "Beard Cover" Baffles (D1700265) SR3 Table Baffle (D1700270) SR3 Cage (with new Venetian Baffles D1700239) SR3 TCS ROC Heater (D1500258) ZM2 Cage + Spacer (D1600094) ZM2 Septum Window REFL Dump + Spacer (Standard ISC V-Dump & Post + D1700041) Attached are all the pictures. Analysis will come, but my first impression from the raw data (without comparing to any previous data): - The SR3 Cage has several High-Q features at ~300-400 Hz - The ZM2 Cage and ZM2 REFL Dump structures have High-Q features at ~120 Hz. - All other stuff is well-damped. Notes: - When hammering the OFI Side Baffle, we left the accelerometer in the same location as when hammering the cage itself. - When hammering the SRM Table Baffles and the Plus X and Middle Beard Baffles, we left the accelerometer in the same location. - When hammering the SR3 Table Baffles and the Minus X Beard Baffle, we left the accelerometer in the same location.