Reports until 16:13, Wednesday 29 June 2011
LHO FMCS
jodi.fauver@LIGO.ORG - posted 16:13, Wednesday 29 June 2011 (1004)
FMP
The first article Work Platform was given initial fit check around BSC-4. The platform was craned into place with the decks bolted together and then the legs were attached. The platform seemed sturdy enough (John and Bubba walked on it) although John expressed some concern about whether there might be some rubbing against cross-beams, etc. Next, we will see if we can get a cleanroom to fit around the platform or take some careful measurements. Walking plates may be ready for fit check (in BSC-7?) by next week and E-module/spiral stairs (at Y-end?) the following week.