Displaying report 1-1 of 1.
Reports until 17:47, Thursday 13 February 2014
H1 DAQ (CDS, ISC)
david.barker@LIGO.ORG - posted 17:47, Thursday 13 February 2014 - last comment - 18:10, Thursday 13 February 2014(10078)
DAQ restart, new ASC LSC models 
17:44 DAQ restart. supporting new h1asc, h1ascimc, h1lsc models. This has fixed the IPC errors ASC was experiencing.
Comments related to this report
kiwamu.izumi@LIGO.ORG - 18:10, Thursday 13 February 2014 (10080)
Link

Yuta, Kiwamu,

We made small changes on h1lsc, h1asc, h1ascimc:

  • We resolved the IPC  issue (alog 10061) by changing block's name in h1asc so that they match wiht the sender block names in the LSC model.
  • We added two new IPC blocks in h1asc which are sent from h1lsc:
    • LSC-ASC_POPAIR_B_LF
    • LSC-ASC_POPAIR_B_RF90_I
  • We deleted MC_F_LF IPC block and its anti-ailiasing filter from h1lsc as they had never been used. Note that they had been already removed from l1lsc.
  • We deleted MC_F_LF IPC reciever from h1ascimc

All these models were successfully compiled, built and installed. And they are running fine so far. Also they are now checked into the SVN.

Displaying report 1-1 of 1.