(Corey, Keita)

Started TMS work out at EY after the SUS team, and embarked on unloading the cornucopia of TMS Tooling.  An unfortunate thing is I installed Tooling which wasn't needed (I was confused by Tooling drawing), and also forgot to lock down the Upper Mass.  So after hours of frustration (& cussing), I was able to grab Keita to help out.  With both of us down there, we were able to:

• Install Safety Support Turnbuckle System (this is what secures the TMS for Catrdidge Move)
• Install Protective Cover (we actually should have done this before installing items above, but we were able to needle it in to place)
• Installed a Quad Bag over the entire structure
• Removed the Electronic Interface Feedthru from the Test Stand