I noticed some cut-n-paste IPC errors in the h1asc model which needed resolving before we upgrade to rcg2.8.3.
1. IPC from h1asc to sus PR2,PR3 and PRM: RFM parts instead of Dolphin (PCIE). These were done today, so it was easy to hand edit H1.ipc and remove these 6 parts from the end of the file. I then edited h1asc.mdl and replaced the RFM parts with PCIE parts.
2. IPC from ASC to SUSHTTS: Dolphin (PCIE) parts used instead of Shared Memory parts (SHMEM). Slightly more difficult to fix as subsequent PCIE parts have been added. I removed the ASC parts and shuffled the later parts down in index. Then changed h1asc.mdl to replace PCIE with SHMEM.
Finally using rcg2.8.3 I performed a "make h1asc" which populated H1.ipc with the correct ASC part types. I verified the additional parts were correctly indexed.