The readback channels for the corner station ring heaters seem to not have been working properly since last Friday. I've attached a graph that shows that the ring heaters seem to have turned off at 02-21-2014 22:5:32 UTC. Judging from the ALOG around that time, there were a lot of reboots going on in software, I'm not sure about hardware reboots. However, Kiwamu says that the PRC power level is looking like the ring heaters are on just based off of the amount of loss he measured. He also advised that since the system is working well, I should hold off on trying to power cycle the TCS chassis until a later time but at the first chance I get, we should try to resolve this issue.
The ITMX ring heater is also displaying similar weirdness, which is expected since they share the same chassis and PLC.