.......LVEA:  Laser SAFE..............EY:  Laser SAFE.........EX:  Laser HAZARD.......

A major activity today was the installation of the Spool at EY, installation of viewports on the spool, and then getting PCal pylons staged into position.  Other activities are:

• Jeff:  Dust Monitor #1 in LVEA is in HAM5 cleanroom--had INVALID alarms most of the day, so it is currently offline to charge overnight.
• JAX checking for shorted cable at ISCTEY
• Justin heading to EY & EX to check stuff (900-945)
• Betsy:  working at ITM build area most of the day
• Mitch West Bay Clean-up (925-955)
• EY #1 dust monitor is at the spool clean room for spool installation, it had a blown fuse and it was replaced, and should now be online
• Filiberto:  HAM4 cable pulling
• Jax:  heading backto ey
• Cyrus:  working on PEM rack at MY
• gerardo:  ofi work in H2 psl room
• Jeff/Andres:  Working on SR3.  Running TFs now
• SEI Measurements at EY 2-4pm?  But HEPI tripped during measurement
• Travis:  searching for weld panels at end stations
• Justin & I (with help from Arnaud) followed Sebastian's instruction for bringing back a few BSC ISIs from Watchdog Trips