Apollo has started taking the doors off of HAM6, will then move to HAM4. This will involve a forklift and light craning.
Plan to be laser safe in morning, laser hazard for TCS work in the afternoon.
Hugh will lock the HEPI and ISI on HAM4.
SR2 alignment is planned for tomorrow.
One cleaning of HAM4 was done on Friday, second cleaning underway this morning.
Competing airflows between the BSC and HAM cleanrooms may need to be addressed.
TCS alignment work will start with the X arm. Justin plans to install laser barriers near HAM6. These may need to be inside the cleanroom over HAM6.
Peter plans to be working in the H2 PSL enclosure.