I updated the H1ECATY1PLC2 xml file with the required manual setting to be compatible with the autolockers, and turned it on.

All of the original four CSD prototype targets (H1ECATX1PLC2 H1ECATY1PLC2 H1ISCEX H1ISCEY) are now running.

I also stood up the infrastructure for the CSD for H1LSC and H1LSCAUX - this was literally just running the commands:

./createCSD H1LSC lsc /ligo/cds/lho/h1/burt/2014/04/28/12:00/h1lscepics.snap
./createCSD H1LSCAUX lsc /ligo/cds/lho/h1/burt/2014/04/28/12:00/h1lscauxepics.snap

followed by adding the systems to the CSD main screen.