CDS workstations were frozen and not accepting logins. Cyrus fixed this with a reboot of cdsfs0. 08:52 Jeff and Andres to set up dust monitors near HAM 4,5,6 09:15 Hugh to HAM4 09:24 RO in alarm, sent email to Ski 09:56 Hugh out of HAM4, HEPI is locked, doors are still on 10:24 Matt, David working on TCS HWS table 10:46 Travis heading out to LVEA test stand area, cleanup work 10:52 Email from Ski, RO is fixed 10:53 Richard into H1 diode room 11:09 Jeff looking for serial cables near HAM1, HAM2 11:16 Hugh to lock HAM4 ISI 11:57 Hugh out of HAM4, ISI is locked 12:14 I reset the WD for the BS ISI, Guardian brought it back ? I reset the WD for ETMY HEPI 12:27 Richard to end X to look at power supply 12:31 Monthly phone test of Hanford site emergency alert system 12:35 Jeff done installing dust monitor at HAM4 at location 1 12:47 Karen to end Y to clean 12:59 I ran the script to isolate ETMY HEPI to level 1 13:34 I restarted the video4 computer and the FOMs 13:37 Justin transitioned the LVEA to laser HAZARD 13:37 Karen back from end Y 13:42 Vern, Matt and David working on TCS rotation stage in LVEA 13:51 I reset the WD for ETMY HEPI. I ran the script to isolate ETMY HEPI to level 1 13:56 Jeff installed a dust monitor at location 6 inside the clean room over HAM 6 14:05 Richard to end X to look at high voltage supply 14:58 Richard back from end X, working on dust monitor in diode room