Day Shift Summary LVEA Laser Safe 08:30 Sprague – On site to spray outside buildings 08:48 Patrick – Going to Mid-Y to pick up parts 08:53 Justin – Shuttering PSL & ALS lightpipes 09:00 Gerardo – Soft close GV5 & GV7 09:00 Rick, Peter, Chris, & Justin – Working in H1-PSL enclosure 09:15 Praxair – Delivery to LX-CP2 09:28 Patrick & Thomas – Working on TSC-X 09:29 Filiberto & Andres – Checking electrical connection to HAM6 dust monitor 09:34 Cyrus – Recovering parts from LVEA test stand 10:00 Jeff – Restart BS model 10:08 Hugh – General HEPI maintenance work in LVEA 10:08 Andres – Moving 3IFO Vibration Absorbers to the West Bay storage racks 10:26 Betsy & Jason – Alignment setup at HAM6 10:30 Bottled water delivery 10:45 Jeff – Restarting Quad Models 11:12 Hanford on site to take water samples 11:52 Sebastien – Installing new BSC-ISI master model/MEDM screens and WD code 12:30 Gerardo – Reopen GV5 & GV7 13:22 Justin – Transition LVEA to laser hazard 13:30 Matt, Dave, Thomas, & Co – Starting CO2 laser on TCS-X 13:40 Kiwamu – Restarting ISC, ASC, h1scex, h1scey, h1asc models 14:20 Gerardo – Working in the H2-PSL enclosure 15:05 Check diode chiller water level – Level OK, no water added to system 15:15 Craig – Working in the H2-PSL enclosure 15:55 Jeff - Restarting all SUS models 16:00 Dave – Will restart DAQ when ASC model update is complete