Day Shift Summary
LVEA Laser Safe

08:30 Sprague – On site to spray outside buildings
08:48 Patrick – Going to Mid-Y to pick up parts
08:53 Justin – Shuttering PSL & ALS lightpipes
09:00 Gerardo – Soft close GV5 & GV7
09:00 Rick, Peter, Chris, & Justin – Working in H1-PSL enclosure 
09:15 Praxair – Delivery to LX-CP2 
09:28 Patrick & Thomas – Working on TSC-X 
09:29 Filiberto & Andres – Checking electrical connection to HAM6 dust monitor
09:34 Cyrus – Recovering parts from LVEA test stand
10:00 Jeff – Restart BS model
10:08 Hugh – General HEPI maintenance work in LVEA 
10:08 Andres – Moving 3IFO Vibration Absorbers to the West Bay storage racks
10:26 Betsy & Jason – Alignment setup at HAM6
10:30 Bottled water delivery
10:45 Jeff – Restarting Quad Models
11:12 Hanford on site to take water samples
11:52 Sebastien – Installing new BSC-ISI master model/MEDM screens and WD code
12:30 Gerardo – Reopen GV5 & GV7
13:22 Justin – Transition LVEA to laser hazard
13:30 Matt, Dave, Thomas, & Co – Starting CO2 laser on TCS-X
13:40 Kiwamu – Restarting ISC, ASC, h1scex, h1scey, h1asc models
14:20 Gerardo – Working in the H2-PSL enclosure
15:05 Check diode chiller water level – Level OK, no water added to system 
15:15 Craig – Working in the H2-PSL enclosure
15:55 Jeff - Restarting all SUS models
16:00 Dave – Will restart DAQ when ASC model update is complete