Kiwamu, Alexa, Stefan We fine-tweaked the UIM drive template for ETMY: 2014-04-30_H1SUSETMY_L1_L2PY_SweptSine_OLDamp_Off_5Hz2600mHz.xml and ran it (with OL damping on, so the name is wrong...) This one needs **SAVING** in the morning. We also prepared 2014-04-30_H1SUSETMY_L1_L2PY_SweptSine_OLDamp_REALLYOff_5Hz2600mHz.xml and script-started it at 30 past midnight (after turning off OL). Note that this one uses ISCINF as excitation point, so the two measurements could run in parallel, except off course that the OL damping will be switched off (not that it makes any difference below 0.3Hz.) This one should auto-save once it finishes.