jason.oberling@LIGO.ORG - posted 13:41, Thursday 01 May 2014 (11672)
SR2 X, Y, Z Alignment Complete
IAS: J. Oberling
SUS: B. Weaver
We completed the position alignment of SR2 this morning. The position errors are below.
Y (longitudinal): +0.4 mm (west)
Tolerance: ±3.0 mm
X (lateral): -1.2 mm (south)
Tolerance: ±5.1 mm
Z (vertical): +0.4 mm (high)
Tolerance: ±3.4 mm
I have started the setup for the SR2 pitch/yaw alignment (it differs from the position alignment) and hope to finish tomorrow morning so we can get a first look at SR2 pitch/yaw before the afternoon transition to laser hazard.