8:54 am, Jeff and Andres to the CS VEA, work around HAM4/5 area.
9:05 am, Jason to the CS VEA, East bay area for alignment work. <-- Done by 12:33 pm.
9:20 am, Jeff requested aide from Apollo, work on and around HAM6, 30 min. curtain work while using a small scissors lift.
9:20 am, Travis to the CS VEA, West bay area for ACB assembly work.
9:30 am, Betsy  to the CS VEA, East bay area work.
9:42 am, Richard to End Y VEA, ESD work.
10:18 am, David H. to CS VEA, near HAM4, Hartmann sensor table work.
11:00 am, Restarted video4, loaded camera views only, no striptool, elimination process for "freezing" issue.
12:00 pm, ACB crew out of CS VEA.
12:45 pm, Cris to X-End station VEA, cleaning.
12:45 pm, Karen to Y-End station VEA, cleaning.
1:11 pm, Travis to CS VEA, West bay area for ACB work.
1:13 pm, Mitchell to CS VEA, West bay area for ACB work. <-- Done 2:20 pm.
1:16 pm, Betsy to CS VEA, West bay area for ACB work.
1:45 pm, Justin transitioned the LVEA to laser hazard.
2:30 pm, Thomas and David to CS VEA, East bay area for TCS work, powering laser inside table.
2:45 pm, Mark L. to CS VEA, TCS install work.
3:45 pm, Jeff and Andres to CS VEA cleaning area. <-- done 4:05 pm