Fabrice and Dave:
We successfully made a new h1isiitmy model using the latest isi2stagemaster model changes. We restarted h1isiitmy with the new code
Chris, Sheila, Dave:
I found that I had mistakenly restarted an incorrect h1asc model on Tuesday. After the first DAQ restart that day I noticed that the DAQ picked up a newer INI fle for h1asc and I assumed (which we should never do) that the last "make install" was correct. It appears that later changes were not installed.
I did a clean "make" and "make install" on h1asc and restarted the model.
Dave:
Finally I did a DAQ restart to support the above changes (remembering to wait into the next 10min period to flush out the second trends)
Here is the restart sequence in detail:
2014_05_15 13:16 h1isiitmy
2014_05_15 13:19 h1asc
2014_05_15 13:22 h1broadcast0
2014_05_15 13:22 h1dc0
2014_05_15 13:22 h1fw0
2014_05_15 13:22 h1fw1
2014_05_15 13:22 h1nds0