8:00-9:42 Getting ready to move clean room in LVEA (Craning) – Apollo 8:30 Water supplier on site – Paradise 8:35 Going into the LVEA to search for parts – Corey 8:40-14:00 Continue assembling/suspending/balancing of the ACB suspension- Betsy/Travis/Margot 8:48-13:02 Heading into the LVEA for SRM alignment – Jason 9:00-11:50 Joining Jason on SRM alignment – Jeff B 9:05-9:44 Retrieving items from LVEA - Gerardo 10:04-12:02 Heading in to the LVEA for TCSx table work – David 10:09-15:43 ICS rack inventory in LVEA – Filiberto 13:14 Restarting ISI model for ITMY – Dave/Fabrice 13:16 Restarting ASC model and the DAQ – Dave/Fabrice 13:32-14:20 Back to HAM5 to connect BOSEMs – Jeff B 14:05 Transitioning the LVEA to Laser HAZARD 14:13 Back to West bay (LVEA) – Betsy/Travis/Margot 14:37 Back to the LVEA for TCSY table work – David/Greg LVEA is Laser HAZARD! NOTE: Today while going over the CDs Check sheet, I noticed that the Right BOSEM on PRM was reading almost 0. I talked to Alexa and concluded that it was because the suspension has been yawed.
Also, the flag of this osem seems to be a bit offcentered when the offsets are off (~ 100 um). We should recenter during next vent.