The idea is to wrap up commissioning by Saturday night. The ring heater stress test can proceed on Sunday. The vent can start Monday.

• IMC/PRCL adjustment: Prepare to move MC2: 1.95 mm towards HAM1 (IMC needs to get shorter).
• EY ESD fix: No in-vacuum work planned. Do we need to discharge?
• Conflat for mirror discharging: Need to refit in EX.
• Camera ports: Put new viewports in (need ECR, Corey).
• EY QPD centering: nothing to do.
• EX QPD centering: Friday morning (Keita, Daniel)
• POP beam path beamsplitter: procedure by Lisa (Thursday)
  POP QPD sled was centered in the past (Keita lead)
• Change mode of ALS/POP periscope in HAM1: Tighten screws (next HAM1 vent)
• Are all in-vacuum picos working? yes.
• Test photodetector pods for leaking? No.
• Alignment fiducials:
  Mark IMC REFL on the wall, on ISCT (Sheila, Friday)
  REFL beam on WFS (write down TT bias)
  REFL beam parking position(?)
  Oplev readbacks
• AS port alignment: still need procedure (Lisa)
• TCS ring heater test: Sunday
• EY ALS WFS: Saturday
• Interferometer REFL beam dump?
• IMC trans beam clipping? no