I have a script which reports if  a model's filter file has been modified since last loaded, or was partially loaded (with the potential that other filters in the file have not been loaded). I'm thinking of running this at the end of every Tuesday maintenance to remind subsystem personnel if reloads are needed. Pending filter changes should be applied as soon as is possible, model restarts, power outages and RCG upgrades will load the latest filter files.

here is the output from the script for today

      h1isiham2: has modifed IIR file, investigate any prior loads
      h1isiham3: has modifed IIR file, investigate any prior loads
      h1isiitmy: has partial load, further investigation is required (last load was ITMY_ST1_T240SUBTRACT_Z Complete)
      h1hpiitmy: has partial load, further investigation is required (last load was ITMY_ISO_HP Complete)
      h1hpiitmx: has partial load, further investigation is required (last load was ITMX_SENSCOR_X_WNR Complete)
      h1susitmy: has partial load, further investigation is required (last load was ITMY_M0_LOCK_Y Complete)
        h1susbs: has modifed IIR file, investigate any prior loads
        h1tcscs: has partial load, further investigation is required (last load was ITMX_CO2_QPD_B_SEG3 Complete)
          h1lsc: has modifed IIR file, investigate any prior loads
          h1asc: has modifed IIR file, investigate any prior loads
       h1ascimc: has partial load, further investigation is required (last load was IMC_IM4_TRANS_SUM Complete)
      h1susetmy: has partial load, further investigation is required (last load was ETMY_L3_ESDOUTF_DACCT_UR Complete)
      h1susetmx: has modifed IIR file, investigate any prior loads
      h1hpietmx: has partial load, further investigation is required (last load was ETMX_ISO_VP Complete)