Rich, Jeff, Arnaud, Dave

During the power glitch recovery Rich found that the DACs were not driving on h1hpietmy. I discovered my new SWWD on h1susey had tripped from the TMSY suspension. I had noticed earlier that two of the TMSY OSEM signals looked bogus, and Jeff found that the incorrect ADC channels were being read for two channels. To correct the problem quickly to get Rich back on track, I fixed the simulink model and compiled against RCG2.8.3 (the version which was running was compiled against branch2.8). This means the trip level is back to 15,000 counts and the resets are cached. I'll rebuild against branch2.8 tomorrow as part of the HAM4,5,6 install. Also the MEDM still has the incorrect raw signals for these two channels.