Jim is the Operator on shift today, but he is needed to help out with work at BSC3 for the ITMx alignment.  Here's my summary from 8:15 - 10:55am:

• Apollo:  feedthru work, craning of scissor lift & installing soft roof on cleanroom.
• Jim working on BSC3 HEPI for ITMx alignment work
• Richard investigating AC unit
• Peter taking down PSL to work on Flow Sensors
• ITMx alignment checks (Jason/Betsy)
• BSC3/ITMx HEPI check (Jim/Greg)
• Oplev/TCS/elec stuff (Thomas)
• Dust Mon #6 being replaced & HAM4/5 contamination control
• Travis working in Test Stand cleanroom & out at ITMx
• HAM4 Viewport inspection (Joe D & Gerardo)
• HAM6 photos & installation work on picomotors (Corey)