SEI MEDM screens were all updated (HAM-ISI, BSC-ISI, HEPI) to account for the recent changes in the IOP Dackill channels names.
Displays are fully functional again for both HAM-ISI and HAM-HEPI. (before/after - notes)
BSC-ISI and BSC-HEPI need the IOP DACKILL parts to be updated so channel names match with chamber names, as It is currently the case on HAM chambers. DaveB has agreed to do those changes, and the related model restarts, next week so the BSC chamber IOP DACKILL channels are named as follow:
$(IFO):IOP-SEI_$(IOP)_SEI$(CHAMBER)_DACKILL_STATE, with $(CHAMBER) taking the following values: 'BS', 'ITMX', 'ITMY', 'ETMX', 'ETMY'
Work was performed under DaveB's WP #4672
$(IFO):IOP-SEI_$(IOP)_SEI$(CHAMBER)_DACKILL_STATE, with $(CHAMBER) taking the following values: 'BS', 'ITMX', 'ITMY', 'ETMX', 'ETMY'
This is not correct, it should be:
$(IFO):IOP-SEI_$(CHAMBER)_DACKILL_STATE, with $(CHAMBER) taking the following values: 'BS', 'ITMX', 'ITMY', 'ETMX', 'ETMY'
This line too in the medms needed to be correct from $(IFO):IOP-$(IOP_NAME)_DACKILL_STATE to $(IFO):IOP-SEI_$(CHAMBER)_DACKILL_STATE