[Vincent L, Hugo P, Rich M, Celine R]

On Monday, we noticed the following weird reading from the seismometers pods (pressure signals):

• T240 corner 1 & corner 3 read 0
• T240 corner 2 reads ~64 when other pressure reads ~70 (in kPa but we also have figured out that the calibration is wrong)
• L4C corner 3: Pressure reads 0, and diff 18
• GS-13 corner 3: Pressure reads 94 and diff -18

Checking at the pods, we were able to check:

• T240 corner 1 & 3 are actually not returning any voltage => pressure sensors dead
• L4C H3 could not be checked  but the problem moved with the cable => pressure sensor dead
• L4C V3 had a normal readout=> pressure sensor live
• GS-13 V3 had a normal readout => pressure sensor live

At this point, that means that we need 2 T240 and 1 horiz L4C pod replacements.