Finished alignment equipment setup and took a first look at the alignment of ITMy this afternoon.  Current alignment errors are below (due to the size of their errors, pitch and yaw are very rough estimates only accurate to approximately ±500 µrad).

• X axis (lateral):  -2.2 mm (south)
  • Tolerance: ±1.0 mm
• Y axis (longitudinal): 0.0 mm
  • Tolerance: ±3.0 mm
• Z axis (vertical): +0.7 mm (high)
  • Tolerance: ±1.0 mm
• Pitch: ~2 mrad up
  • ±50 µrad
• Yaw: ~2 mrad CCW
  • Tolerance: ±50 µrad