08:45 Matt H. and Jeremy going into HAM2 08:50 Mike V. going into LVEA to help Mitchell with CPB 09:12 Stewart going into HAM3 09:18 Filiberto swapping ITMY and ITMX UIM coil drivers [WP 4748] 09:20 Hugh going to BSC1 09:38 Nathan starting unattended work with laser in OSB optics lab 10:12 Filiberto finished WP 4748 10:19 Mike L. going to LVEA west bay to work with Gerardo on optic charging experiment 10:47 Mitchell and Mike V. going to LVEA west bay to move CPB 10:54 Gerardo going to LVEA west bay to work on optic charging experiment 11:06 Hugh and Jim out of BSC1 11:44 Mitchell and Mike V. out of LVEA 12:51 doors going on HAM3 12:55 Jeff B. and Andres going to HAM3 12:59 Stewart going to HAM3 13:03 Richard going to end Y to take pictures through viewports 13:22 end X transitioning to laser hazard 13:43 Mike L. and Gerardo going to west bay to work on optic charging experiment 14:24 Richard back from end Y 14:45 Manny to end Y to turn off illuminator 15:15 Jim B., Patrick replacing light bulb in right side projector 15:16 Paul and Jordan to end Y to pull cable for accelerometer 15:18 Kyle starting WP 4749, PT343 valved out from beam tube volume 15:33 end X transitioned to laser safe 16:02 Mike L. and Gerardo out of LVEA 16:30 Gerardo and John W. discovered that the right side projector is overheating, taken down 16:45 Nathan will be supervised by Dick G. in the OSB optics lab