8:15-8:45 Morning Meeting
8:50-11:30 Heading into the LVEA to continue with HAM2/3 work – Matt/Jeremy
8:55-11:30 Contamination & Control work in LVEA - Jeff B
8:59-12:00 Going to End Y to work on illuminator – Aaron
9:15-12:00 Working on Optics Lab/Laser ON – Nathan
9:35-11:24 Locking/ Unlocking suspension in LVEA (BSC1 & BSC3) – Travis
9:39-11:24 Heading into the LVEA to work on ACB – Mitchell/Mike V.
9:52-12:18 Stage Viewport Preparation in LVEA – Gerardo
10:20-12:18 Joining Gerardo in the LVEA for Electric Field measurements – M. Laundry  
10:22-11:30 HAM 2 testing in LVEA – Stuart/Arnaud
10:24 - Restarting h1odex model - Dave 
12:13- 14:50 Heading back to the LVEA – Matt/Jeff B/Jeremy/Apollo
12:17- 14:50 Heading back to the LVEA – Stuart/Arnaud
12:43-     Going to End X to work on illuminator – Aaron
13:12-13:56 Working at End Y – Karen
13:18-     Replacing BSC2 ISI chassis in Electronics room – Filiberto
13:40-LVEA transitioning to Laser Hazard – Richard
14:21-12:18 Back to the LVEA for Electric Field measurements – Gerardo/M. Laundry  
14:23- LVEA transitioning back to Laser SAFE – Richard
14:37- 15:40 Returning to the LVEA to work on ACB – Mitchell/Mike V.