LVEA laser safe 08:55 Aaron – Going to End-X and to End-Y to check noise eater switch 09:01 Mitch – In LVEA working on ACB installation 09:13 Matt, Danny, & Gary – In LVEA gathering up tools for End-X close out 09:15 Manny – In LVEA to survey kill switches 09:33 Doug & Jason – ACB alignment Y-Arm 09:34 Nathan – Laser work in Optics lab 09:40 Apollo – Pulling North door on HAM6 to pull leak check bung 10:08 Mike – Taking tour into LVEA 10:15 Andres – In the LVEA cleaning area working on contamination control assembly 10:30 Gerardo & Joe - Going to End-X for viewport survey 10:39 Matt, Danny, & Gary – Going to End-X to prep for chamber close out 11:18 Notified Kyle of alarm on IP-05 12:36 Test of Hanford emergency alert system 13:00 Filiberto & Manny – End-Y to pull PEM cables 13:10 Mitch & Travis – In LVEA for Y-Arm ACB installation work 13:31 Justin – End-X and End-Y for laser survey 13:37 Betsy – Working in Beer Garden to prep for BSC closeout 13:50 Gerardo – In LVEA west bay working on ionization experiment 13:52 Paul & Jordan – Going to End-Y to take PEM measurements 14:34 Matt, Danny, & Gary – At End-X preparing for chamber close 15:50 Filiberto - Checking ACB photo diode