[Arnaud P, Stuart A]

Following closing up chambers, I've created new Guardian nodes for the remaining missing output arm suspensions, SUS_SRM and SUS_OMC, which have been verified to be operating correctly under Guardian control.

Also, Guardian was paused for all suspensions while the chamber close-out work was being carried-out. Since, this is now complete HAM2, HAM3, HAM4, HAM5, HAM6 and X end suspensions have been transitioned to EXEC mode, and Gurdian will be monitoring for any Watchdog trips (see Guardian Overview Status attached below).

n.b. measurements are now underway for ITMX. ITMY, and Beamsplitter over the weekend, so Guardian remains paused for these suspensions for now.