J. Kissel, T. Sadecki

Travis has plugged in OSEMs to QUAD06 mounted to Mechanical Test Stand 1, read out by QUADTST, in the West Bay of the LVEA for the first time in many moons. After having re-compiled, re-installed, restarted the front end process a few days ago (see LHO aLOG 13833), the EPICs records ha not been restored. In addition, the OSEMINF and DAMP filter banks were sorely out of date. So, I BURT-restored the presumably very-old 
${userapps}/release/sus/h1/burtfiles/h1susquadtst_safe.snap
which restored all matrix elements correctly. I then installed the just-measured open light current values (recorded below for QUAD06). However, since the foton filters were all wrong, I took some time to copy the OSEMINF and DAMP filters from H1SUSITMY, turn them on correctly, checked that the matrices and COILOUTF gains are correct, and grabbed a new safe.snap. and committed both filter file and fase.snap.

Travis will gather the OSEM serial numbers shortly and match them to there location installed below.

OSEM  Open Light      Compensation    Compensation
      Current [ct]      Gain [ ]       Offset [ct]
M0F1    29723            1.009           -14862
M0F2    29212            1.027           -14606
M0F3    28998            1.035           -14499
M0LF    27100            1.107           -13550
M0RT    29422            1.020           -14711
M0SD    29032            1.033           -14516
R0F1    26949            1.113           -13474
R0F2    28436            1.055           -14218
R0F3    27950            1.073           -13975
R0LF    28311            1.060           -14156
R0RT    27786            1.080           -13893
R0SD    26947            1.113           -13474