SudarshanK, TravisS, RickS

We moved the ETMY camera from the viewport above the Pcal input viewport to the viewport adjacent to the optical lever input port down at the bottom of the A1 adapter.

This location gives a more complete view of the ETM (less occluded by the Arm Cavity Baffle).

Fitting the camera can in that location required rotating it about 10 deg. due to interference with the OptLev sheet metal cover. The GigE camera was rotated to roughly orient the view such that the flat on the ETM is vertical.

An image of the ETM with the new camera view is attached below.