The first file contains plots of IFO-coordinate-basis transfer functions from actuator to displacement sensor and GS-13 for each 6 degrees of freedom on our unit_2 assembly.  The excitation band was from 0.025 to 800 Hz.  

The second pdf file contains the results of the same measurement from unit_1 testing. The third file is a text file of the parameters used for the measurement.

Data stored in:
'~/seismic/HAM-ISI/X1/Data/unit_2/TransferFunctionData/'

Plots located in:
'~/seismic/HAM-ISI/X1/Data/unit_2/Figures/'
This directory also contains the .fig files for use in Matlab.


Scripts to plot data:
'~/HAM-ISI/X1/Scripts/DataAnalysis/unit_2/TFanalyze_100820_M2M_0p025to800hz.m'