(Corey, Jim, Vincent)
V3 CPS Swap
At Corner3, we had a broken Coarse (Stage0-1) Vertical (V3) CPS; the serial numbers for the bad CPS/board are: 12865 & 12337. The Sensor was removed from the ISI, and its board was pulled out of its mini-rack.
The new Sensor was installed/aligned, its new board was installed in the rack, and then the gap was set for this Sensor. Here are the serial numbers for our new V3 CPS:
S/N: 12898(probe) & 12416(guage/board)
PS: Vincent's informed me, may have yet another bad CPS, and yes, it's at Corner3 again (more to come later).