Displaying report 1-1 of 1.
Reports until 17:52, Tuesday 09 December 2014
H1 AOS
krishna.venkateswara@LIGO.ORG - posted 17:52, Tuesday 09 December 2014 (15521)
LLO Sensor correction filter turned on at ETMX

J. Warner, K. Venkateswara

As detailed in LHO alog 15511 and SEI alog 645, the BSC chambers would benefit from LLO's "0.43 Hz only" sensor correction filters for X and Y

Jim and Rich had installed the filters previously. I turned them on at ETMX along X and Y. The gains were set to ensure clear subtraction on the CPS channel relative to the ground by a factor of ~10 near 0.43 Hz as seen in the attached plots.

Non-image files attached to this report
Displaying report 1-1 of 1.