I've written another python script to turn on seismic sensor correction. The plan is to eventually put this under Guardian control, but I wanted to make a simple 1 button turn on tool for the commissioners. It lives in the same location as the other scripts: /ligo/svncommon/SeiSVN/seismic/BSC-ISI/H1/Common/Misc/Test_Configuration_Scripts. Just cd into the fold run: ./Senscor_On.py or ./Senscor_Off.py as appropriate. This script turns on all the sensor correction on all of the chambers (ISI on HAM, HEPI and ISI on BSC), so it's more of a sledge hammer, not a scalpel.