LVEA: Laser Hazard Observation Bit: Commissioning 07:00 Karen & Cris – Cleaning in the LVEA 08:01 Kyle – Soft close on GV5 & GV7. Prep work for door removal of HAM1 08:10 Kyle, Gerardo, Bubba – Removing door on HAM1 08:15 Hugh – Working on CS HEPI system 08:20 Hugh – Taking down HEPI pump in LVEA mezzanine to fix leak 08:48 Aaron – Working on PEM power cables in LVEA 08:50 Filiberto – Going to End-Y to prep for ESD cabling 09:30 Hugh – Finished with HEPI work and out of LVEA 09:10 Peter – Going into the H2 PSL enclosure to take pictures 09:19 Doug & Jason – Going into the LVEA to prep for HAM5 OpLev check 10:24 Jonathan – Recycling 2F authentication system 10:36 Karen & Cris – Going to End-Y to deliver garb and clean 10:38 Betsy & Travis – Going to End-Y to work on cleaning ETM-Y 10:40 Filiberto – Going to End-Y 11:00 Add 200ml water to diode room chiller 12:28 Rick – Going to End-Y 13:08 Cris – Going to End-X to restock garb and turn on small cleanrooms 13:08 Karen – Going to End-Y to restock garb 13:30 Betsy, Travis, and Rick – At End-Y cleaning 13:35 Adjutant on site for repair work for Kyle 13:48 Sheila, Elli, and Kiwamu – Going into HAM1 to do alignment 13:54 Dale – Going to HAM1 to take pictures 14:50 Krishna & Fabrice – Going to End-X to work on BRS system 15:23 Travis – Going into the LVEA looking for Acetone 15:30 Rick, Travis, & Betsy – Going back to End-Y for more optics cleaning 15:48 Sheila – Transitioned LVEA to laser safe