This morning, travis and I pulled the FC sheet that we applied to the ETMy yesterday. The patchy smudge mark and the large gooeyish particle that we induced yesterday were apparently picked up by this FC sheet. While there, we tested using the cotton tipped Q-tip on a portion of the ring around the edge of the optic (~1Inch in from bevel edge near the bottom). We used both DI water and also acetone, both chased with ~5 spot drag wiped of acetone using the pressure technique. Upon evaluating neither q-tip+ acetone drags seemed to improve the area since both swipes added to the streaking which the chasing acetone could not fully remove with 5 wipes.