Summary:

Main activities in the LVEA were venting the Y-Beam Tube Manifold (for feedthru work on BSC8) and bringing in our new big Mode Cleaner Tube (see attached).

Activities:

• Crane inspections in the LVEA
• 9:01Snow Valley here for Ski
• 9:14-9:22 Filiberto updated SUS Test Stand Cables
• 9:25 Kyle starting on Vent
• 10:28  h2 daq reboot
• 11:00 electrical inspector to work with Ken Dyer
• 11:05 Beam Tube arrives (truck escorted around & not contacted via gate phone)
• lots of access alarms at the H2 PSL
• 2:10  Stoneway electric here for delivery for Ken
• 3:00 beamtube brought into LVEA (caused some DST7 Alarms)

Contractors:

• Snow Valley met with Ski
• Stoneway & an electrical inspector worked with Ken