LVEA: Laser Hazard Observation Bit: Commissioning 08:00 Cris – Delivering garb to End-X 08:40 Doug – OpLev work at HAM4 08:51 Kyle & Gerardo – Roughing BSC10 09:00 Betsy, Travis, & Rick – At End-X 09:10 Fabrice – BS & HAM3 Testing 09:13 Filiberto & Aaron – PEM cabling work in the Beer Garden 09:30 Karen – Going to End-Y 09:55 Kyle & Gerardo – Back from End-Y 10:18 Jim – Going to End-X to unlock HEPI & ISI 10:30 Shutdown dust monitor at HAM1 10:36 Karen – Back from End-Y 10:40 Dale – High School tour in control room 11:19 Dave – Going to End-Y to adjust cameras 11:21 Jim – Back from End-X 11:45 Betsy, Travis, & Rick – Back from End-X 12:50 Jim – Going to End-X to unlock HEPI 12:52 Filiberto – PEM and cabling work in Beer Garden and along spool arms 13:50 Dave – At End-X to adjust cameras 14:02 Kyle, Gerardo, & Bubba – End-X Install West door, connect pump cart and pump annulus 14:05 Dave – Back from End-X 14:44 Filiberto – Out of the LVEA 14:47 Dave – Restarting HAM3 models 15:28 Rick – Taking Mike R. and friend on tour of LVEA 15:40 Kyle, Gerardo, & Bubba – Finished with BSC9 door install, started pumping annulus