09:03 Vern to end X 09:07 Jim W. and Sebastian to LVEA to turn off HAM3 HEPI pier pods 09:14 Hugh craning in LVEA 09:26 Jim W. and I turned off sensor correction at end Y 09:31 Corey and Grant to the squeezer bay 09:37 Jeff B. and Andres to LVEA west bay to move 3IFO parts 09:43 Travis to end X 09:57 Hugh craning in LVEA 10:00 Jodi out of LVEA, reports clean room between HAM2/3 is on 10:03 Doors back on end X 10:39 Mitchel parking crane in LVEA 10:52 Hugh and Mitchel out of LVEA 10:57 Rick to end Y to work on photon calibrator 11:11 Sheila and Evan turned off clean room at HAM1 11:12 Manny done 11:19 Pepsi truck through gate 11:35 Jeff B. and Andres out of LVEA 11:48 Doug measuring distances for optical lever light pipes near HAM3/4 11:55 Kyle and Gerardo back from end X (started pumping) 12:52 Betsy putting parts in the cleaning bay 13:02 Filiberto to end X to look at cabling 13:04 Corey to squeezer bay 13:28 Aaron to end Y, PCAL cabling 13:51 Aaron done 14:40 Elli working on IOT2 Cyrus and I ran fsck on h1conlog3 Dave tested compilation of frontend models against RCG 2.9 In chamber work was completed at end X