J. Kissel

I've caputured and committed new safe.snap files in order to capture the updated ODC bitmasks (see LHO aLOG 15951), as well as to remove old Guardian variables that are no longer in the autoburt.req file as of the removal of the guardian block from all models. A full list of those models' snap files that have been captured is shown below. Once captured, I've made sure that the alignment offsets and ASC loops have been restored. Note that some suspensions have integrators in the top stage P and Y LOCK filters, which have stored values in them (i.e. PRM, PR3, SRM, and SR3, BS, and ITMs).  In order to capture the safe, I've turned off the outputs to these filters. However, again, once captured I've restored them and ensure the same outputs.

h1susim
h1sushtts
h1susmc1
h1susmc2
h1susmc3
h1susprm
h1suspr2
h1suspr3
h1sussrm
h1sussr2
h1sussr3
h1susbs
h1susitmx
h1susitmy
h1susetmx
h1susetmy
h1sustmsx
h1sustmsy