Karen & Cris: Cleaning in the LVEA
Hugh: Starting work in MR for WP 4913

07:30 - 07:45 Jodi: Picking up 3IFO optics from mid Y
08:15 Jim B.: Stopping data concentrator. Building data concentrator version 2.9. Restarting DAQ to bring to version 2.9.
08:18 Jeff B. & Andres: Moving suspensions onto platform in LVEA. Going into bifurcated laser safe area.
08:20 Hugh: Retrieving parts from LVEA
08:49 Unifirst: Truck through gate
09:10 Karen: Cleaning at mid Y
09:13 Dave B. & Jim B.: Starting upgrade of frontends to RCG 2.9
09:31 Travis & Danny: Moving welding equipment in LVEA
10:03 Kyle: Checking access for WP 5005
10:11 Brian S. & Mitchel: Putting equipment in LVEA
10:26 Karen: Leaving mid Y
10:46 Travis & Danny: Entering LVEA
11:00 Cyrus: Firmware upgrade on OPS work station
11:04 Praxair: Truck through gate
11:05 Corey: 3IFO work at mid Y
11:10 Travis & Danny: Out of LVEA
11:30 - 11:50 Jodi & Jeremy: Surveying mid stations for 3IFO storage
12:00 Brian, Danny & Mitchel: Out of LVEA
12:04 Jeff B. & Andres: Out of LVEA
12:31 Dave B. & Jim B.: RCG upgrade complete
13:13 Corey: 3IFO work in squeezer bay
13:17 Filiberto & Sudarshan: Checking PSL power supplies
13:26 Kyle: Checking pump at end X
13:53 Richard: Turning on ESD at end X
14:08 Richard: Back from end X
14:12 Kyle: Back from end X
14:19 Jeremy & Brian: Loading equipment outside of LVEA
Jim B.: Updating GDS software WP 4997
15:00 Dale: Tour in control room
15:12 Jeff B. & Andres: Out of LVEA. Had been transferring suspensions into LTS container. Started around 13:30.
15:21 Keita: Going to squeezer area to talk to Corey
15:35 Ketia: Out of squeezer area
15:59 Corey: Out of squeezer area