Karen & Cris: Cleaning in the LVEA Hugh: Starting work in MR for WP 4913 07:30 - 07:45 Jodi: Picking up 3IFO optics from mid Y 08:15 Jim B.: Stopping data concentrator. Building data concentrator version 2.9. Restarting DAQ to bring to version 2.9. 08:18 Jeff B. & Andres: Moving suspensions onto platform in LVEA. Going into bifurcated laser safe area. 08:20 Hugh: Retrieving parts from LVEA 08:49 Unifirst: Truck through gate 09:10 Karen: Cleaning at mid Y 09:13 Dave B. & Jim B.: Starting upgrade of frontends to RCG 2.9 09:31 Travis & Danny: Moving welding equipment in LVEA 10:03 Kyle: Checking access for WP 5005 10:11 Brian S. & Mitchel: Putting equipment in LVEA 10:26 Karen: Leaving mid Y 10:46 Travis & Danny: Entering LVEA 11:00 Cyrus: Firmware upgrade on OPS work station 11:04 Praxair: Truck through gate 11:05 Corey: 3IFO work at mid Y 11:10 Travis & Danny: Out of LVEA 11:30 - 11:50 Jodi & Jeremy: Surveying mid stations for 3IFO storage 12:00 Brian, Danny & Mitchel: Out of LVEA 12:04 Jeff B. & Andres: Out of LVEA 12:31 Dave B. & Jim B.: RCG upgrade complete 13:13 Corey: 3IFO work in squeezer bay 13:17 Filiberto & Sudarshan: Checking PSL power supplies 13:26 Kyle: Checking pump at end X 13:53 Richard: Turning on ESD at end X 14:08 Richard: Back from end X 14:12 Kyle: Back from end X 14:19 Jeremy & Brian: Loading equipment outside of LVEA Jim B.: Updating GDS software WP 4997 15:00 Dale: Tour in control room 15:12 Jeff B. & Andres: Out of LVEA. Had been transferring suspensions into LTS container. Started around 13:30. 15:21 Keita: Going to squeezer area to talk to Corey 15:35 Ketia: Out of squeezer area 15:59 Corey: Out of squeezer area