Using Dave's extract from the Guardian logs since the RCG 2.9 restart to generate an exclude file.  I've loaded SDF Tables for all LHO HPIs (except HAM1.)  Attached is a snap of the donot monitor file; this is Dave's file with filter module core names removed (Guardian uses ezca which doesn't have to use a complete name to manipulate a switch) and the HPI MASTER_SWITCH added (the SEI Manager toggles this switch, not the HPI Guardian.)  Also in the image is the difference table from the SDF before the donot_monitor list was added.  After updating the Table, the diff list went to zero channels.

All HAM HPI currently have no diffs--let's keep it that way.  The BSC HPIs have a few diffs (1-4,) these are a few ISC settings and sensor correction gains that need to be corrected by updating the safe.snap value.  Fab tool!

Thanks to Dave & Jonathan.