Below please find a few pix of the ISI and its transition into Y-end VEA. 
DSC00316: The BSC transport container moving from the cleaning area into the VEA. Not much room to spare with racks in the way! ;-)
DSC00328: The transport container in the VEA with the roll-up door closed. Not much room here either.
DSC00348: The guys getting ready to pick the ISI. Note that the top of the transport container has been removed.
DSC00361: Many hands making light work of covering the bottom of the ISI after the pick but before the set-down.
DSC00368: The ISI and the top of the transport container sitting side-by side near the termination slab. There is just enough room for Mark D.'s foot in between.
The transport container was put back together, removed from Y-end, and returned to the Corner. With the transport container and the ISI out of the way, the pedestals of the test stand were returned to their proper locations in front of the roll-up door. The rest of the test stand will follow tomorrow.