07:51 Karen and Cris in the LVEA
07:58 Jim W. turning off HEPI to ISI feedforward on all BSC chambers to run measurement for ~ 20 min.
08:03 Hugh restarting end Y HEPI pump servo
08:15 Aidan going through the LVEA on the way to the high bay
08:18 Jeff B. to LVEA to look at dust monitors, work with Mitchel in West bay on bag and tag
08:21 Rick to end Y
08:40 Christina driving forklift from LSB to high bay
08:45 Sudarshan and Thomas to end Y for PCAL work
08:49 Cris to mid X
08:50 Alastair to LVEA to check on TCS laser
08:57 Aidan working on 3IFO near HAM6
09:01 Rick back from end Y
09:12 Betsy and Travis to the West bay
09:19 Andres moving 3IFO parts from the LVEA to the staging building
09:28 Doug to LVEA to take pictures
09:51 Richard to LVEA
09:56 Jeff B. and Doug out of LVEA
09:58 Jim W. running measurement on ETMY
10:00 Mitchel out of LVEA
10:03 Thomas and Nutsinee back from end Y
10:14 Travis and Betsy out of LVEA
10:45 Dave B. to CER to check on TCS AA chassis
10:51 Dave B. and Aidan to CER to power on TCSY AA chassis, does not work, Filiberto and Aidan investigating
11:37 Thomas and Elli back from end X
11:41 Thomas and Elli to end Y
11:42 Bubba to mid X to check on possible noisy air handler
11:54 Kiwamu starting WP 5047
11:56 Bubba back from mid X
12:09 Thomas and Elli back from end Y
12:16 Kiwamu restarting SUS ETMY model
      Bubba back to mid X
13:39 DAQ restart for new CALCS model
15:03 Jim W. to HAM5 to read serial number off box