LVEA: Laser Hazard
Observation Bit: Commissioning   

07:00 Karen & Cris – Cleaning in the LVEA
08:22 Hugh – LVEA for HEPI maintenance work
08:36 Jodi – In the LVEA for 3IFO stuff
08:37 Christina – Forkliftng boxes from LSB to VPW
08:45 Jim B. – Starting work on the NTP server move
08:45 Matt – Turning on CO2-Y laser
08:50 Richard – Vacuum survey in the LVEA
08:51 HFD on site testing fire alarms
08:55 Kyle & Gerardo – Swapping out Ion pumps on HAM1 & HAM2
09:00 Peter, Jason & Ed – In the PSL for RefCav and FSS work
09:01 Corey – Working in the squeezer bay
09:34 Richard – Going to End-Y with HFD to test fire alarms
09:51 Hugh – Finished with HEPI in LVEA – Working on pump controller.
09:52 Jodi – Out of the LVEA
10:00 Praxair delivering N2 to Mid-X
10:03 Paradise Water on site
10:30 Filiberto – Working on TCS-X RF cabling
10:48 Richard – Back from End-Y
10:55 Kiwamu – Checking IOT2L for beam clipping
11:00 Doug – Looking for OpLev parts near HAM2
11:00 Peter, Jason, & Ed – Finished in the PSL 
11:05 Reset HEPI watchdog counters
11:38 Dave – Restarting new PEM corner station model & making cable changes in CER
11:42 Kyle & Gerardo – Out of the LVEA
11:50 Dave – DAQ restart
11:50 Kiwamu – Out of the LVEA
12:35 Karen – Going to End-Y
12:35 Cris – Going to End-X
12:43 HFD on site testing smoke alarms at End-X
13:10 Kyle & Gerardo – Leak checking at HAM1 & HAM2
13:51 Karen – Leaving End-Y
13:52 Filiberto – Connecting TSC RF cables
13:55 Kiwamu – Checking mirror pointing in IOT2L
14:22 Filiberto – Out of the LVEA
14:30 Kiwamu – Out of the LVEA
14:41 Jason – In LVEA getting parts from the OpLev cabinet
14:56 Jason - Out of the LVEA