Displaying report 1-1 of 1.
Reports until 10:35, Wednesday 18 March 2015
H1 SUS (DAQ, DetChar, SUS)
edmond.merilh@LIGO.ORG - posted 10:35, Wednesday 18 March 2015 (17336)
RMS Watchdog trip - ITMX L2(PUM)

The usual procedure for clearing this trip condition is to change the reset value on the MEDM screen from 1 to 0 and then back again. This had no effect, in this case. After consulting with Stuart Aston, it seemed the only other recourse was to power cycle the PUM coil driver for ITMX. This was done ~10:20PST. THis action was successful. This smells like a software issue?

Displaying report 1-1 of 1.