Before commissioning commenced this morning, I received the all clear to rebuild, install and restart the SUS ITMX & ITMY models that were modified last night to include DARM_CTRL signals (see LHO aLOG entry 17599).

- SDF snapshots were taken of both ITMs in SAFE state and checked into the svn
- BSC-ISIs were transitioned to OFFLINE state
- Models compiled, installed and restarted, with no issues
- ITMs WDs un-tripped and recovered to ALIGNED state
- BSC-ISIs WD'd un-tripped and recovered to FULLY_ISOLATED state

As, suspected, it was necessary to restart the DAQ process, which was carried-out courtesy of Jim B at approx 09:30am [PT], with no issues.