07:50 Jeff B. to HAM6
08:00 Daniel S. restarting h1lsc model, errors
08:12 Daniel S. restarting h1ecatc1
08:41 Elli and Nutsinee to end Y
09:13 Rick, Travis and Sudarshan to end Y to work on PCAL
09:25 Filiberto and Koji to HAM6 to check grounding
09:31 Rick to end Y
09:34 Peter K. to H2 PSL enclosure
09:38 Hugh de-isolated HEPI on HAM1, going out to check clearances
09:52 Jeff B. to 3IFO storage area to put optics in the desiccant cabinet
10:03 Hugh back
10:12 Betsy to HAM6
10:18 Jeff B. done
10:20 Karen to mid Y, Cris to mid X
10:49 Jeff B. to HAM6 to check on dust monitor reporting low battery alarm
10:55 Jeff B. back, dust monitor plugged back in
11:01 Richard to LVEA to check on Filiberto
11:08 Richard back
11:12 Karen leaving mid Y
11:30 Koji and Filiberto out, found short
11:44 Peter K. out of H2 enclosure
12:12 Greg G. turning on TCS X laser
12:47 Tour in CR
13:18 Elli and Nutsinee back from end Y
13:31 Rick, Travis and Sudarshan back for lunch
13:32 Hugh reisolating HAM1
13:33 Richard to LVEA to look at dewpoint sensor and check on Filiberto
13:50 Elli and Jeff running excitation on etmy
13:54 Jeff and Elli stopping etmy excitation, starting etmx excitation
13:56 Jeff stopping excitation on etmx
14:13 Peter K. transitioning LVEA to laser safe
14:21 Richard to LVEA to look at dewpoint sensor and check on Filiberto
14:36 LVEA transitioned to laser safe
14:42 Richard back
door being tacked on
14:54 Elli and Nutsinee to end X
15:25 Dave restarting ASC model
15:36 Jason and Suresh replacing SR3 optical lever laser