We performed the final test stand alignments for the BSC08 Quad today.  Pitch was adjusted on the ITM and the ITM/CP gap was measured and the parallelism set.

• ITM pitch: ~35 µrad up
• ITM/CP parallelism (±0.25mm spec = ±5'3" of angle = ±1.47 mrad)
  • CP pitch: ~364 µrad up
  • CP yaw: ~2.04 mrad left
    • After discussing with Dennis, it was decided that we would not adjust the CP yaw
• ITM/CP gap: 19.96mm
• ITM pitch (after CP adjustments): ~54 µrad up

This was the last of the test stand alignments.  The cartridge has now been handed off to the testers to complete required tests before the cartridge install.